040-0618/01 – Safety of technologies and systems (BTS)

Gurantor departmentDepartment of Occupational and Process SafetyCredits4
Subject guarantorIng. et Ing. Vendula Laciok, Ph.D.Subject version guarantorIng. et Ing. Vendula Laciok, Ph.D.
Study levelundergraduate or graduateRequirementCompulsory
Year3Semesterwinter
Study languageCzech
Year of introduction2021/2022Year of cancellation
Intended for the facultiesFBIIntended for study typesBachelor
Instruction secured by
LoginNameTuitorTeacher giving lectures
BAR44 doc. Ing. Ivana Bartlová, CSc.
DRA156 Ing. et Ing. Vendula Laciok, Ph.D.
Extent of instruction for forms of study
Form of studyWay of compl.Extent
Full-time Credit and Examination 2+2
Part-time Credit and Examination 14+0

Subject aims expressed by acquired skills and competences

The graduate of the course: gains knowledge about creating hazardous concentrations during normal operation, starting and stopping the machinery and possible causes of damage; understands the initiation of flammable files in production processes and analyses the causes of fires, explosion and the leakage of toxic substances; can explain the physicochemical properties and technical safety parameters of dangerous substances and apply them in practice; gains knowledge about the identification of fire and explosion hazards inside and outside technological plant machinery on selected physical and chemical processes and the storage of flammable liquids and gases; gains an overview of the use of new technologies and systems in practice, focusing on the emerging dangers of collaborative robots, drones, 3D printing, etc.

Teaching methods

Lectures
Tutorials

Summary

Předmět je zaměřen na možné příčiny poškození zařízení při normálním provozu, najíždění a odstavování; iniciaci hořlavých souborů ve výrobních procesech; identifikaci nebezpečí požáru a výbuchu uvnitř i vně technologických zařízení na vybraných fyzikálních a chemických procesech i při skladování hořlavých kapalin a plynů, využívání nových technologií a systémů v praxi se zaměřením na nově vznikající nebezpečí.

Compulsory literature:

Bartlová. I., Balog. K.: Hazard analysis and prevention of industrial accidents. SPBI Spektrum, Ostrava 2007, 2nd Release, 191 with., ISBN 978-80-7385-005-0 Bartová I., Damec J.: Prevention of technological equipment. SPBI Spektrum, Ostrava 2002.239 S., ISBN 80-86634-10-8 ČSN EN ISO 10218-1 Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots ČSN EN ISO 10218-2 Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration

Recommended literature:

KOCOUREK, Jaroslav and Jaroslav SOLVÁTKO. Drones: A practical guide for DJI drone owners. Prague: TELINK, Spol. S R.O., 2017. ISBN 978-80-7346-228-4. KLOSKI, Liza Wallach and Nick KLOSKI. Get started with 3D printing. Translated by Jakub GONER. Brno: Computer Press, 2017. ISBN 978-80-251-4876-1. MACDONALD, Dave. Practical industrial safety, risk assessment and shutdown systems for industry. Burlington, MA: Newnes, c2004. ISBN 978-0750658041.

Way of continuous check of knowledge in the course of semester

Závěrečný písemný test, kontrola přečtené odborné literatury, konverzační témata.

E-learning

Other requirements

At least 80 % attendance at seminars. Absence of a maximum of 20% must be excused and the excuse must be accepted by the teacher (the teacher decides on the justification of the excuse). Continuous submission of tasks assigned to the exercises in terms set by the teacher

Prerequisities

Subject has no prerequisities.

Co-requisities

Subject has no co-requisities.

Subject syllabus:

1. Creation of hazardous concentrations during the installation of the plant machinery, during normal operation and in the damage and accident. 2. Possible causes of plant machinery damage, initiation resources in production processes and their limitations. 3. Physicochemical properties and technical safety parameters of liquids and gases and their use in practice. 4. Character of hazards and prevention of the process of heating flammable substances. 5. Character of hazards and prevention of rectification processes. 6. Character of hazards and prevention of drying process. 7. Character of hazards and prevention of sorption processes. 8. Character of hazards and prevention chemical processes. 9. Hazard and prevention storage and production of flammable liquids. 10. Hazard and prevention storage and production of flammable gases. 11. Basic prevention of technological equipment. 12. Industry 4.0 – Using new technologies in practice. Centre of Simulation Technologies (CESIT). 13. Industry 4.0 – Collaborative robotics focusing on emerging hazards and prevention.

Conditions for subject completion

Conditions for completion are defined only for particular subject version and form of study

Occurrence in study plans

Academic yearProgrammeBranch/spec.Spec.ZaměřeníFormStudy language Tut. centreYearWSType of duty
2024/2025 (B1022A020001) Bezpečnost práce a procesů P Czech Ostrava 3 Compulsory study plan
2024/2025 (B1022A020001) Bezpečnost práce a procesů K Czech Ostrava 3 Compulsory study plan
2024/2025 (B1022A020001) Bezpečnost práce a procesů K Czech Praha 3 Compulsory study plan
2024/2025 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE P Czech Ostrava 3 Choice-compulsory type A study plan
2024/2025 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Praha 3 Choice-compulsory type A study plan
2024/2025 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Ostrava 3 Choice-compulsory type A study plan
2023/2024 (B1022A020001) Bezpečnost práce a procesů P Czech Ostrava 3 Compulsory study plan
2023/2024 (B1022A020001) Bezpečnost práce a procesů K Czech Ostrava 3 Compulsory study plan
2023/2024 (B1022A020001) Bezpečnost práce a procesů K Czech Praha 3 Compulsory study plan
2023/2024 (B1022A020001) Bezpečnost práce a procesů K Czech Lázně Bohdaneč 3 Compulsory study plan
2023/2024 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE P Czech Ostrava 3 Choice-compulsory type A study plan
2023/2024 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Ostrava 3 Choice-compulsory type A study plan
2023/2024 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Praha 3 Choice-compulsory type A study plan
2022/2023 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Ostrava 3 Choice-compulsory type A study plan
2022/2023 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE P Czech Ostrava 3 Choice-compulsory type A study plan
2022/2023 (B1032A020009) Fire Protection Engineering and Industrial Safety PRE K Czech Praha 3 Choice-compulsory type A study plan
2022/2023 (B1022A020001) Bezpečnost práce a procesů K Czech Lázně Bohdaneč 3 Compulsory study plan
2022/2023 (B1022A020001) Bezpečnost práce a procesů K Czech Ostrava 3 Compulsory study plan
2022/2023 (B1022A020001) Bezpečnost práce a procesů P Czech Ostrava 3 Compulsory study plan
2022/2023 (B1022A020001) Bezpečnost práce a procesů K Czech Praha 3 Compulsory study plan
2021/2022 (B1022A020001) Bezpečnost práce a procesů K Czech Lázně Bohdaneč 3 Compulsory study plan
2021/2022 (B1022A020001) Bezpečnost práce a procesů P Czech Ostrava 3 Compulsory study plan
2021/2022 (B1022A020001) Bezpečnost práce a procesů K Czech Ostrava 3 Compulsory study plan
2020/2021 (B1022A020001) Bezpečnost práce a procesů K Czech Ostrava 3 Compulsory study plan
2020/2021 (B1022A020001) Bezpečnost práce a procesů K Czech Lázně Bohdaneč 3 Compulsory study plan
2020/2021 (B1022A020001) Bezpečnost práce a procesů P Czech Ostrava 3 Compulsory study plan

Occurrence in special blocks

Block nameAcademic yearForm of studyStudy language YearWSType of blockBlock owner

Assessment of instruction



2023/2024 Winter