# 330-0305/01 – Mechanics of Materials (PaP)

 Gurantor department Department of Applied Mechanics Credits 5 Subject guarantor prof. Ing. Karel Frydrýšek, Ph.D., FEng. Subject version guarantor prof. Ing. Karel Frydrýšek, Ph.D., FEng. Study level undergraduate or graduate Study language Czech Year of introduction 2015/2016 Year of cancellation Intended for the faculties FS Intended for study types Bachelor
Instruction secured by
DRA0110 Ing. Lukáš Drahorád
FOJ08 doc. Ing. František Fojtík, Ph.D.
FRY72 prof. Ing. Karel Frydrýšek, Ph.D., FEng.
FUS76 doc. Ing. Martin Fusek, Ph.D.
HAL22 prof. Ing. Radim Halama, Ph.D.
HRO0075 Ing. Juraj Hronček
KOR0145 Ing. Michal Kořínek
LIC098 Ing. Mgr. Dagmar Ličková, Ph.D.
NEV073 Ing. Martin Nevřela
POL0400 doc. Ing. Stanislav Polzer, Ph.D.
ROJ71 Ing. Jaroslav Rojíček, Ph.D.
RYB0077 Ing. David Rybanský
SCH0267 Ing. David Schwarz
SKO0116 Ing. Ondřej Skoupý
SMA0022 Ing. Jiří Šmach
SOF007 doc. Ing. Michal Šofer, Ph.D.
SOT0036 Ing. Martin Šotola, Ph.D.
Extent of instruction for forms of study
Form of studyWay of compl.Extent
Full-time Credit and Examination 2+3
Part-time Credit and Examination 16+4

### Subject aims expressed by acquired skills and competences

To teach the students the basic procedures and methods applied for the solution of technical problems of strength and elasticity (i.e. mechanics of materials). To ensure the understanding of teaching problems. To apply the gained skills in practice.

### Teaching methods

Lectures
Individual consultations
Tutorials

### Summary

This subject teaches the basics terms of mechanics of deformed bodies. Basic types of tensions (i.e. tension, pressure, bending, torsion, buckling, limit states) for statically determinate and indeterminate cases. Discussed issue is in the branch of linear elasticity and gives skills applied for the design and assessment of simple technical structures.

### Compulsory literature:

Frydrýšek, K. (2016). Basic Strength and Elasticity of Materials, VŠB - Technical University of Ostrava, 1-264, ISBN 978-80-248-3870-0 FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 - Extended Edition (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, Ostrava, 2008, Czech Republic, pp. 203. FRYDRÝŠEK, K., LENERT, J.: Mechanics of Materials, VŠB-TU Ostrava, 2005, ISBN 80-248-08006-4, pp. 63.

### Recommended literature:

FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, ISBN 978-80-248-1550-3, Ostrava, 2007, Czech Republic, pp. 179.

test

no

### Other requirements

Lecture attendance, not another request

### Prerequisities

Subject has no prerequisities.

### Co-requisities

Subject has no co-requisities.

### Subject syllabus:

1. Second moment of area (gravity centre) 2. Second moment of area (section modulus) 3. Introduction to mechanics of elastic bodies. 4. Simple stress and stain (tensile and compression) 5. Tensile, compression. Trusses evaluation. 6. Tensile, compression. Statically determinate problems. 7. Tensile, compression. Statically undeterminate problems. 8. Torsion of hollow shaft. 9. Torsion of hollow shaft. Statically undeterminate problems. 10. Simple bending theory. Shearing force, bending moment. 11. Simple bending theory. Stress evaluation. 12. Simple bending theory. Slope and deflection of beams. 13. Simple bending theory. Castigliano theorem. 14. Simple bending theory. Castigliano theorem. Statically undeterminate problems 15. Simple bending. Beam with broken axis. 16. Simple bending. Beam with broken axis. Statically determinate problems. 17. Simple bending. Beam with broken axis. Statically undeterminate problems. 18. Multiaxial stress. Principal stress. Mohr circle. 19. Theory of elastic failure. 20. Combined loading. Tension (compression) and bending. 21. Combined loading. Bending and torsion.

### Conditions for subject completion

Full-time form (validity from: 2021/2022 Winter semester)
Min. number of pointsMax. počet pokusů
Credit and Examination Credit and Examination 100 (100) 51
Credit Credit 35  20
Examination Examination 65  16 3
Mandatory attendence participation: The acquired knowledge of the students is continuously verified during each lesson in the form of discussion and questions with the aim of active involvement of students in the issue. After completing the credit, students have to take an exam which consists of an oral and a written part.

Show history

Conditions for subject completion and attendance at the exercises within ISP: The compulsory participation rate is 80%. To fulfil the credit, students will pass the specified coursework and defend it at the end of the semester.

Show history

### Occurrence in study plans

Academic yearProgrammeBranch/spec.Spec.ZaměřeníFormStudy language Tut. centreYearWSType of duty
2022/2023 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2021/2022 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2020/2021 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2020/2021 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2020/2021 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2020/2021 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2020/2021 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2020/2021 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan
2020/2021 (B2341) Engineering (2302R010) Design of Machines and Equipment (50) Hunting, Sporting, Defense Arms and Ammunition K Czech Uherský Brod 2 Compulsory study plan
2019/2020 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2019/2020 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2019/2020 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2019/2020 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2019/2020 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2019/2020 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan
2018/2019 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2018/2019 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2018/2019 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2018/2019 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2018/2019 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2018/2019 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan
2018/2019 (B2341) Engineering (2302R010) Design of Machines and Equipment (50) Hunting, Sporting, Defense Arms and Ammunition K Czech Uherský Brod 2 Compulsory study plan
2017/2018 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2017/2018 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2017/2018 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2017/2018 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2017/2018 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2017/2018 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan
2016/2017 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2016/2017 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2016/2017 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2016/2017 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2016/2017 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2016/2017 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan
2016/2017 (B2341) Engineering (2302R010) Design of Machines and Equipment (50) Hunting, Sporting, Defense Arms and Ammunition K Czech Uherský Brod 2 Compulsory study plan
2015/2016 (B2341) Engineering P Czech Ostrava 2 Compulsory study plan
2015/2016 (B2341) Engineering P Czech Šumperk 2 Compulsory study plan
2015/2016 (B2341) Engineering (2301R003) Transport Equipment and Technology P Czech Ostrava 2 Compulsory study plan
2015/2016 (B2341) Engineering K Czech Ostrava 2 Compulsory study plan
2015/2016 (B2341) Engineering K Czech Šumperk 2 Compulsory study plan
2015/2016 (B2341) Engineering (2301R003) Transport Equipment and Technology K Czech Ostrava 2 Compulsory study plan

### Occurrence in special blocks

Block nameAcademic yearForm of studyStudy language YearWSType of blockBlock owner
Subject block without study plan - FS - P - cs 2021/2022 Full-time Czech Optional FS - Faculty of Mechanical Engineering stu. block
Subject block without study plan - FS - K - cs 2021/2022 Part-time Czech Optional FS - Faculty of Mechanical Engineering stu. block
Subject block without study plan - FS - K - cs 2017/2018 Part-time Czech Optional FS - Faculty of Mechanical Engineering stu. block
ECTS - MechEng - Bachelor Studies 2015/2016 Full-time English Choice-compulsory 301 - Study and International Office stu. block